For the first electronics project on the blog, I wanted to start with the 555 Morse Code Practice Oscillator. This is a simple and relatively cheap project. All the parts used on this project are common and can be ordered from any electronics website or Amazon. The frequency range of this oscillator is .5 KHz -1.5 KHz.
First assemble the oscillator on solderless breadboard and test for proper operation. Once tested permanently solder to a project board. VR-1 controls volume of the speaker. VR-2 controls the frequency. This oscillator can accept 6-12VDC power. Soon I will 3d print a case for this project. A future project will be a more modern oscillator using an arduino.
A Little About The 555
The 555 was released in 1972 by Signetics. The chip was designed by Hans R. Camenzind. The number of applications far exceeded his expectation. Being so versatile, you can find them in anything from video games to satellites. At almost 50 years old, this chip is still being produced.
For more on the 555 check out these links.
Latest Posts
- 2:1 Balun For 2m/6m
- 1:1 Choke For 2m and 6m
- 2m Delta Loop Ver 2
- 2m Delta Loop
- Finishing The 6m Delta Loop With 2:1 Balun
KM4NMP 
The 555 is one of the most versatile chips out there.
LikeLiked by 1 person
Almost 50 years old and still being produced and used. Hundreds of uses and reliable.
LikeLike
Yes indeed.
LikeLiked by 1 person